Elaut E-Claw Cosmic

A size 5 football fills the claw’s aperture on the drop. The LED facade cycles color across the full cabinet face, visible from the far end of the floor.

Overview

The Elaut E-Claw Cosmic is a single-player crane machine built specifically for large merchandise — size 5 plush toys, softballs, and footballs — that standard-width claw cabinets cannot handle. At 1200mm wide, it is sized to the E-Claw series’ largest footprint, with the claw and gantry calibrated to lift and hold that extra weight. White lacquered aluminum profiles frame the cabinet, and a full-front RGB LED glow system wraps the facade in dynamic, color-changing light controlled by the onboard IntraXion system, which also manages claw strength and payout parameters.

Key Features

Spacious Prize Cabinet Sized for Large Merchandise

The 1200mm-wide interior accommodates size 5 plush toys, softballs, and regulation-size footballs — merchandise that causes prize jams or incomplete grabs in narrower machines. The generous interior also holds spare prize stock alongside the active play field, so operators can reload from within the cabinet rather than carrying merchandise from a back room.

RGB LED Light-Emitting Facade

Environment-friendly RGB LEDs wrap the front facade and cycle through color-changing effects. Operators can dial the lighting from a subdued ambient glow to bold, saturated color — or hold a fixed color to match venue branding. The LED system draws lower power than older fluorescent or incandescent equivalents and carries a longer service life.

IntraXion Control System

Elaut’s IntraXion onboard control system gives operators direct access to claw strength, timing, and prize payout parameters. Settings are adjusted through an accessible interface, allowing operators to tune performance per location without calling in a technician for routine changes. The same system manages the color-changing LED facade, consolidating both game and lighting configuration in one place.

White Lacquered Aluminum Cabinet Profiles

The cabinet frame uses white lacquered aluminum profiles rather than painted steel panels. Aluminum resists corrosion and does not chip or peel under the humidity and daily contact typical of high-traffic venue floors. The white finish also amplifies the LED color output — light reflects off the profiles rather than being absorbed into a dark surface.

Removable Gantry for Field Maintenance

The gantry — the horizontal rail assembly that carries the claw — is designed to be removed without specialized tooling. On-site technicians can access the drive mechanism, swap components, or clear a jam without taking the cabinet offline for an extended period.

Bill Acceptor and Cashless-Ready

The E-Claw Cosmic ships with bill acceptor hardware and is configured to support cashless payment integration. Venues already running card or token-based systems can connect without adding a separate payment kiosk alongside the cabinet.

How It Plays

The player positions the claw over a bed of large plush toys or footballs using the joystick, then drops it onto a prize that fills most of the claw’s aperture — a visibly different grab attempt than what players see on narrower machines. From across the room, the moment of descent and the oversized prize tumbling toward the chute registers clearly against the glowing, color-shifting cabinet face, which stays lit throughout play.

Specifications

Why Operators Love It

Distinct Prize Tier on Any Floor

Most crane machines on a route or FEC floor are sized for small-to-medium plush. The E-Claw Cosmic’s 1200mm cabinet and calibrated claw handle size 5 merchandise that narrower machines cannot stock, giving operators a separate prize tier without adding a different machine category entirely.

Standard Circuit Installation

At 311W on a 120V circuit, the E-Claw Cosmic runs on a standard outlet. Venues with limited dedicated high-draw circuits can place this machine without electrical upgrades.

E-Claw Series Parts Commonality

As part of Elaut’s E-Claw line, the Cosmic shares hardware and software architecture with other E-Claw cabinets. Operators already running E-Claw machines can apply existing service knowledge and, where applicable, common replacement components to this unit.

Cashless Payment Ready Out of the Box

The cabinet ships with a bill acceptor installed and is configured for cashless integration, so operators running card-based or token systems at their venue can connect this unit without sourcing a separate payment peripheral.

Ideal Placement

Family entertainment centers, trampoline parks, bowling alleys, and high-traffic arcades where large-prize merchandise — footballs, size 5 plush — would stand out on the floor. Works as a standalone statement piece or anchoring one end of a crane row.

Shipping & Setup

We offer flexible freight delivery options, including curbside and lift-gate services. Shipping costs and timing are calculated at checkout based on your location and requirements.

Warranty & Support

Your purchase includes a standard manufacturer warranty and access to technical support to ensure long-term performance and uptime.